# How to Help (in 5 mins or less)

Vacuum around a single tool.

Turn on the Wen Filter (remote by the door to the woodshop).

Return errant tape to the craft cart.

Use the  air compressor to blow out the Wen Filter (please do it outside and wear a dust mask).

Lower the blade guard on the bandsaw to the table.

Make sure all of the soldering irons are turned off.

Put the clamps back in their correct spots.

Vacuum out the miter station.

Move the table saw fence over the slot and make sure the saw is off.

Retract the retractable extension cords.

Reset the retractable extension cord breakers.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://decatur-makers-wiki.gitbook.io/decatur-makers-wiki/how-to-help-in-5-mins-or-less.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.