Decatur Makers Wiki
  • Decatur Makers
  • Values
  • Code of Conduct, Community Agreement, Members Handbook
  • Communication
    • Email Channels
    • Decatur Makers in Slack
    • Projector use
  • New Members
  • Student Memberships and Youth Members
  • Active Military/Veteran and Senior Memberships
  • Volunteer Memberships
  • How to Help (in 5 mins or less)
  • Lock-up Checklist
  • Member Policies
    • Non-discrimination Policy
    • Guest/Visitor Policy
    • Firearms Policy
    • Storage Policy
    • Safety
    • Security Cameras
  • 3D PrinterOS
    • Signing up for 3dPrinterOS
    • Printing STL files with CloudSlicer
    • Printing GCode (from a slicer)
    • Slicing Tips
    • 3D Print Troubleshooting
    • Ender3 (Pro-A, Pro-B , Rhea and RightEnder)
    • CR10S4
    • Information for Area Stewards
  • Wood Shop
  • Electronics Shop
  • Glowforge Laser Cutter Engraver
  • MetalShop
Powered by GitBook
On this page

Lock-up Checklist

If you're the last one out of the space, you'll need to lock it up. Below are the things to check before you head out.

  • Lights off (except the one that doesn't turn off)

    • Check the e-shop, upstairs, and the wood shop.

  • Double doors by the e-shop and laser are closed.

  • Lock the door by the stairs. Locking instructions are on the door.

  • Check that the roll-up door is closed and locked.

  • Check that the front door is locked and closed.

PreviousHow to Help (in 5 mins or less)NextMember Policies

Last updated 6 years ago